D link dvg g1402s manual

Name PhoneNum Enter a name to identify the current entry. Enter the telephone number you want to block incoming calls from. Enter the telephone number you want to block outgoing calls to.

The service provider assigns a global IP address from a pool of addresses available to the service provider. Typically the IP address assigned has a long lease time, so it will likely be the Page 39 corresponding Enabled radio button. Next the user must enter the host name and the IP address for that computer by entering the last numbers into the space provided in the IP Address field. Next, the user is to enter the MAC address of the computer into the space provided. Page 42 and set the Status fields to Enabled by clicking the radio button.

To configure other virtual servers for the Router, configure the following fields and click Apply. A packet filter system examines data packets and scrutinizes them in order to control network access. Filtering rules determine whether packets are The rules are created and controlled by the network administrator and can be precisely defined. Page 45 This window will aid the use in configuring filters for IP addresses.

Well known ports have already been previously set in the IP Filters List and can be modified by clicking their The following window will allow users to deny computers access to the Internet or only allow certain computers access to the Internet, based on their MAC address.

To access this screen, click the Advanced tab along the top of the configuration The Firewall configuration screen allows the Router to enforce specific predefined policies intended to protect against certain common types of attacks.

Page 48 may also be chosen by using the pull-down menu. The user may also select a range of ports of the destination IP addresses by entering the range under the Port Range heading. Subnet Mask The subnet mask that corresponds to the IP address above. With RIP, routers occasionally exchange entire routing tables.

They are admin and user. User can only view the settings but cannot make any changes. To restore the configuration file click on Browse to search the local hard drive and locate the configuration file to be used for the configuration restoration.

You can download firmware upgrades to your hard drive from the D-Link support site. A defined set of variables managed objects is maintained by the SNMP agent and used to manage the device. Enter the IP address of PC that you want to use to manage the network. Page Static Dhcp Settings Enter the subnet mask.

Default Gateway: Enter the default gateway you want to assign to your devices. State: Select to enable or disable the rule. Protocol: Select to enable or disable the rule. Firewall Rule State: Select to enable or disable the rule. With RIP, routers periodically exchange entire tables. This can be used to specify that all packets destined for a particular subnet use a predetermined gateway.

Enter the end of the global IP range. The DMZ feature allows you to forward all incoming ports to one computer on the local network.

Call Waiting Alert Tone: T. Time Zone: Select your time zone from the drop-down menu. Click the Refresh button to update the statistics. Clicking the Reset button will set all values to zero. Enter the IP address you want to ping and click the Test button.

Page Troubleshooting 3. Why does my wireless connection drop? Try to keep the antenna at least 6 inches away from the wall or other objects. Do not place this router in a closet or cabinet. A: Be sure that the unit is properly plugged into the AC outlet, the analog phone is properly plugged into the RJ jack behind the unit, and the power connector is plugged in.

Make sure you disable or uninstall any PPPoE software such as WinPoet, Broadjump, or Enternet from your computer or you will not be able to connect to the Internet. D-Link provides free technical support for customers within the United States and within Canada for the duration of the warranty period on this product. Page Warranty Except as otherwise agreed by D-Link in writing, the replacement Software is provided only to the original licensee, and is subject to the terms and conditions of the license granted by D-Link for the Software.

Software will be warranted for the remainder of the original Warranty Period from the date or original retail purchase. Table of Contents. Version 1. Previous Page. Next Page. D-Link dvg-gs Quick Installation Manual 25 pages. D-link dvgs wireless n gigabit multimedia voip gateway pages. Page 4: Rear Panel Connects to a wireless enabled computers using network.

Ethernet cabling. Phone Ports Connect to your phones using standard phone cabling RJ Page 6 Connect the power adapter to the power input at the back panel of the DVG-GS and then plug the other end of the power adapter to a wall outlet or power strip. D-Link Systems, Inc. Click Next. Enter a NTP server or leave blank to use the default server.